Compact concrete station WEMAG WBS500, 625 kWh Li-Ion

WBS500 Neustadt-Glewe
WEMAG WBS500 in Neustadt-Glewe, 2019
  • smartBattery IDT/Samsung
  • Zenon Energy Edition, 8.00
  • HMI Design 1024×768, Touch
  • IEC60870-5 Interfaces -104, -101
  • Modbus-TCP Interfaces
  • Interfacing with network operator
  • Interfacing with virtual power plant smartEMS™ via VHPready
  • Integration Bachmann M1 Controller with GMP grid measurement module

zenon Features

  • Alarm Forwarding
  • Chronological Event List (CEL)
  • Access Levels
  • Automated Line Coloring (ALC)
  • Straton | Zenon Logic

The WEMAG battery storage in compact design (WBS500) was first presented in 2018 as a pilot project in Neustadt-Glewe.
SCADA-Automation provides the know-how and components for the control, visualization and monitoring of the WBS500 from the development phase until today.

The specific inverter/battery combination is mapped in the smartBattery solution.
Through the connection via the VHPready compliant interface to the virtual power plant smartEMS, all automatic operating functions are available via remote control. In absence of a virtual power plant, the local operation management in the WBS enables independent operation.

The operating concept optimized for touchscreens is realized with a modern, slim design (resolution 1,024 x 768 pixels). The full-colour visualisation with anthracite background immediately catches the eye and allows a comfortable overview of the operating status and intuitive on-site operational management.
A series of graphical evaluations supplement the detailed views of the plant.

back to cover